|
Remember to always use appropriate mats under and around
all climbing equipment. For further information regarding JAMMAR equipment
and/or appropriate matting please contact your dealer or
call us at 1-866-848-1113
Toll Free
Jammar Mfg Co. Inc
P.O. Box 392
Uncasville, CT 06382
T: 866-848-1113
F: 860-848-9302 |
Net Installation Hardware |
 Jammar can provide all necessary hardware to install your indoor cargo
climbing net on a typical gym exposed I-beam ceiling. Send us your “floor
to beam” measurement and we can specify the hardware and/or net
which best fits your installation. Worksheet available. Mats, spotting
and supervision required when using.
CNHH-1 Complete Net Hanging Hardware Package
Includes UHB-1014 Universal Hanging Bar
Adaptable to 10', 12', and 14' wide nets; 5 beam clamps and
necessary connectors able to suspend the bar up to a 10' from ceiling
beam. Specify beam to floor measurement. Include any special requirements.
wt approx. 185 lbs |
 UHB-1014 Universal Hanging Bar Telescoping feature allows bar
to adjust to fit any 10', 12', or 14' wide net. Includes eyebolts.
Easy assembly. Ready to hang. Ships UPS!! |
Ceiling Hardware For Climb Ropes |
 |
| click for
larger image |
A-2 Pipe Clamp Hanger
Steel pipe clamp bolts onto any 3 1/2” O.D. pipe via threaded
bolts and lock washers. does not include L-1 (link)
A-1 Wood Beam Hanger
Heavy duty steel L fitting bolts onto wood beam from side
and bottom dimensions.does not include L-1 (link) |
Typical Installations
click for larger image
|
 |
| click for
larger image |
A-3 Adjustable I Beam Clamp
Made of 5/8” steel with threaded rod for adjustment and locked
into position with a hexagon nut and lock washer.
A-3 Fits 3 1/2” - 8” flange
does not include L-1(link)
L-1 Quick Link
1/2” zinc plated quick links for solid attachment from ceiling
hardware to climbing rope. Use with A-3, A-2, or A-1
 A-312
Adjustable Beam Clamp
Versatile all steel adjustable beam clamp complete with two 2-3/4” wide
jaws and ½” threaded rod with self locking nuts.
Fits beams with 3 ½” to 12” wide flange.
Call for wider or thicker special flange requirements. |
 |
| click for
larger image |
CPF-1 Chain Attachment Sling
Install over open truss beam supports and provide an easy and economical
rope hanger. Simply order the 3/8“ chain needed and add 3/8”
zinc plated quick links to each end. Connect top loop to chain with
top link and attach to climb rope with bottom connector. Trim excess
chain if necessary. Also bridge any gap between top of rope and any
other ceiling hanger.
Chain Only CPF-1
3/8” quick link L-38 |
| IKIT-1014 eyebolt kit for “do it yourself” pipe fabrication. Necessary eyebolts needed for 1 1/2" or 2" OD pipe |
 |
Climbing
Rope Accessories
 |
| click for larger
image |
TMB-24 Climbing Rope Tambourine
20” diameter tambourine is constructed from quality 1/2”
thick plywood and comes complete with clamp fitting for easy
installation and height adjustment. 2” diameter center
hole allows tambourine to be slid up any 1 1/2” diameter
climbing rope with unknotted end or over a JAMMAR top fitting
allowing adjustments down rope. Many uses include limiting climbing
heights for age, skill and testing concerns. Popular in facilities
with high ceilings and also prevents climbers from reaching
attachment hardware. |
 |
| click
for larger image |
SCA-1 Safety Cable Attachment
A safety option which can be installed on any Jammar rope providing
an immediate backup device should any ceiling hardware fail.
Cable, splicers and clamp. |
 |
| click for larger
image |
Rope Hoist
Raise ropes to wall or ceiling after use for easy storage and
elimination of possible misuse. Two wall brackets, 60’
cordage with weighted end. 70-lb limit 2 rope max. |
LBRN-2 Lock
Box Rope/Net Hoist
Raise climbing nets and climbing ropes to wall or ceiling
and secure from unauthorized use.
Same as RN-1 but has a locking box surrounding the bottom
rope cleat. Simply “tie off” equipment, place
cordage in box and close and lock. Keeps individuals
and organizations from unauthorized use. Top pulley included.
8”w x 12”h x 4”d with lock and keys
LBRN-BOX Lock Box
Add security to existing rope/net hoist. Lock box/bottom
cleat unit can be ordered separately and used with most existing
hoists. Simply install in same spot as existing wall cleat.
8”w x 12”h x 4”d with lock and keys
|
All climbing activities require soft
matting all around climbing area and an 8-12” landing
mat directly under and around each climber. Correct spotting
and supervision also required. Detailed installation, safe
use and care instructions provided with each rope purchase.
Printable
Version |
|
|
